Stabilised 24V DC power supply for 24V systems.
Establish a stabilised 24 Volt DC power supply circuit on your boat or RV. Protect sensitive electronic devices and LED lamps against over-voltage.
This is a high quality constant-voltage DC-DC converter that can be supplied from any voltage between 18-36V DC and creates a stabilised 24V DC voltage output that can be used to power small voltage sensitive electronic devices such as instruments or LED lamps.
- Maximum output power: 60W
- Suitable for up to 30 LED lights
- Wide input voltage range: 18-36V DC
- Constant 24V output voltage
- Internal open-circuit, short-circuit, overload and over-temperature protection
- Easy to install
This sophisticated voltage converter is not an electronic transformer and therefore does not have a minimum load requirement. Any DC load within its rating can be safely connected. It is ideal for supplying an LED lighting installation which can use freely available and relatively inexpensive 24V LED lamps.
This DC-DC voltage converter should be conveniently installed in-line after your circuit protective device (fuse or circuit breaker).
The size of cable feeding this unit should be of similar cross section as that of the circuit wiring it is being connected into.
This unit can be connected adjacent to the DC power distribution panel (circuit breaker panel). Simply connect power from the panel to the IN terminals and the power OUT terminals to the circuit that requires a stabilised 24V DC supply. There is no need to modify other wiring, or switches.
For maximum loading it is recommended that the unit be fixed to a metal surface to act as a heat sink.
Please note: this device does not replace circuit protective devices such as fuses or circuit breakers. These must remain in place to protect your wiring in the event of a fault occurring.