LED bunk-side light with both red and warm white light output from the same fixture.
On board voltage spike and excess current protection.
This attractive new cool running LED bunk side light defaults to red when first switched on. A simple off, on, toggle of the built in finger friendly switch instantly changes the light to warm white. A further toggle of the switch, with a longer delay changes the light back to red. Switching of output colour is via built in electronics within the lamp.
The dual red/white output lamp used in this fixture has proven to be extremely reliable and has been used on a number of Atlantic crossings. The red light allows crew to read, dress or move about at night without disturbing others whilst also helping to protect night vision. The red light output will illuminate most chart tables very well.
In warm white mode the light fixture offers a nice bright light which outperforms many significantly more expensive fixtures.
This fixture is ready to connect and very easy to install using two screw fixings (hidden).
It is available in a popular ‘chrome’ type plastic finish. The finish is vacuum plated similar to that on taps and modern vehicle fittings. Unlike metal, the finish will not tarnish or corrode in a marine atmosphere.
This attractive LED light swivels in all directions and offers better features and light output well in excess of many LED bunk side light fixtures costing much more.
The LED lamp output is UV free and unlike conventional lamps its light output will not fade surfaces, furnishing fabrics and attract less flying insects.
The lamps used in these fixtures are not polarity sensitive and can be connected either way without damage. However a good practice is to connect the switch feed to the positive conductor.
Voltage: 10-30V DC
Input Power: 1.6W
Input Current: 120mA
Output Lumen: 80 Lm (Warm White) or 20 Lm (Red)
Beam Angle: 120°
Dimensions: 32mm diameter x 12mm +pins
Warranty: 24 months