Our brightest 12SMD 2835 long back pin lamp is protected against voltage transients and excess current. CRI>90 Lamp – excellent for colour rendering.
This compact, planar disc lamp utilised the latest technology. It uses 12 new high CRI 2835 LEDs which offer significantly increased light output compared to 5050 LEDs and have the added benefit of reduced power input compared to similar 5050 lamps and is ideal for both 12 Volt and 24 Volt systems.
This 12 SMD LED back pin lamp has an on board electronic fuse (non-linear thermistor) plus transient voltage (spike) protection. This low EMI lamp is an excellent fit in most halogen down-lights which utilise vertical orientated G4 halogen bulbs. It is particularly suitable for use on boats where there is some experience of LED lamp failures.
This lamp has longer back pins than standard lamps which often aids insertion into narrow fixtures, the pins can be simply trimmed to length to suit individual fixtures.
This very bright lamp compares very well in terms of both colour and light output with a 20W halogen lamp. An on-board Buck-Boost electronic constant current control circuit ensures a constant bright light output when the supply voltage varies and contributes to a long service life. These lamps are designed to minimise EMI, unlike other similar looking lamps sold for non marine use. We utilise specially designed PCB layouts which avoid tracks acting as antenna that radiate EMI (electromagnetic interference).
The light output is UV free and unlike conventional lamps its light output will not fade surfaces, furnishing fabrics and attract less flying insects.
The warm white output is ideal to sympathetically light your boat’s interior.
These lamps are not polarity conscious, they are fitted with a 4 independent diode bridge rectifier and can therefore be connected either way without damage.
- Voltage: 10-30V DC
- Input Current: 133 mA
- Input Power: 2W
- Lumen Output: WW 165 Lumens
- LED: 12SMD 2835
- Beam Angle: 120°
- Colour Temperature: 2692K WW
- CRI: >90
- Dimensions: 30mm diameter x 8.5mm
- Warranty: 24 months